350mm 4 Jaw Independent Chuck D1-8 Mount
The 4 jaw independent chuck is still considered the most economical for turning one-off components and short runs. Bodies are made from high-quality SG iron, with steel operating screws, bearings and reversible jaws. Supplied with a fully machined D1-8 adaptor plate.
Pratt Burnerd 350mm Diameter Chuck
Bore = 75mm
Recess = 260mm
Mounting = 4 x M12 on 286mm P.C.D.
Front or rear mount
Part Number 9502-63501 (supplied as 9500-03501 + 8271-32226)