160mm 4 Jaw Independent Chuck D1-4 Mount
The 4 jaw independent chuck is still considered the most economical for turning one-off components and short runs. Bodies are made from high-quality SG iron, with steel operating screws, bearings and reversible jaws. Supplied with a fully machined D1-4 adaptor plate.
Pratt Burnerd 160mm Diameter Chuck
Bore = 45mm
Recess = 125mm
Mounting = 4 x M10 on 140mm P.C.D.
Front or rear mount
Part Number 9502-31701 (supplied as 9500-01701 + 8271-17223)