Neogrip Magnetic Chuck 100mm Diameter
Neogrip Circular permanent magnetic chucks for grinding and turning
All steel poles can be drilled and tapped up to 15 mm deep to accomodate driving pins, stops or other jigs and fixtures.
Holding force can be reduced during set-up to aid workpiece centering.
Features
Double pack of Neodymium magnets provides high holding power
Balanced design allows high turning speeds
Very low magnetic field
Low construction height
To accommodate driving pins, stops and other jigs and fixtures, all steel poles can be drilled and tapped up to 15 mm deep
Hole diameter may not exceed width of pole
For repetitive work, additional top plates can be purchased
Usable top plate life: 7mm
Nominal holding force: 80N/cm2
Holding force can be reduced during setup to aid workpiece centering
H Dimension is 50mm
Part Number 15.00.100
Repair service available. Please phone 0121 551 1566 for details.