16C A2-5 Pull Back Collets Chuck

16C A2-5 Pull Back Collet Chuck

Pull Back series collet chuck available in 2 mount types (A5, A6).
Capacity (mm): 0.5 - 42
Pull Back Ratio: 1:3
Max Drawbar Pull (kN): 24
Max Speed: 6000rpm
Net Weight: 6, 8kg
Collet Ref: 16C

Pull Back Action
The gripping pull-back action to actuate the collet chuck means the work
piece will be moved slightly in the Z-Axis. This is normally acceptable for
first operation work and the work piece position can easily be determined
with a facing cut.
Problem Free Installation
Klamp collet chucks are provided with mounting bolts and a custom machined
drawtube connector allowing you to start using the Klamp collet chuck straight
out of the box.
Quick & Easy Mounting
Klamp collet chucks mount directly to the lathe spindle or use a precision
adaptor plate to ensure a consistent mounting without the need for correction.
The precision fit of the Klamp collet chuck enhances the rigidity of the overall
system. The need for adjustment is minimal, meaning less machine down-time.
Long Service Life
All Klamp collet chucks are case hardened and ground optimising
the rigidity, strength and durability.
High Speed
Direct mount design ensures high concentricity that is suitable for
higher speed operations that are not appropriate for conventional
3-jaw chuck due to the negative effects of centrifugal force.
Low Profile
Small nose diameter to provide excellent tool clearance.

Part Number DEL16CA2-5